KONEKO MIDI to CV

Hello world it is the KONEKO eurorack module, it is an affordable Midi to CV converter (Volt per Octave), it is 14HP width and needs +/- 12V, +5V power.

Main features:

CV1 PITCH output 0 to +5 Volt range (5 octaves) it comes from a very accurate 12 bit resolution (4096 steps) digital to analog converter DAC, which translates the incoming midi note messages to voltage. It also responds to the pitch bend or pitch wheel control, according to the midi standard it has a range of +/- two half steps.

Glide effect, it affects the CV1 PITCH output.

Gate output 0 or +5 Volt. it has a red LED that indicates when there is an active gate signal.

CV2 output 0 to +5 Volt range, it comes from a 7 bit resolution (128 steps) digital to analog converter, it can be easily set to output the velocity or any controller CC from the midi device.

PROGRAM button allows you easily set the midi channel just by pushing it and then pushing a note in your midi keyboard, the midi channel will be automatically set and stored even when the unit is turn off. It also allows you to set the controller CC for the CV2 output, just push the Program button and move any controller in your midi device and it will be set automatically.

Midi In and Midi Thru connectors, allows you to connect many midi devices in chain.

available soon...